Made in Sheffield, UK
SKU: 02B3-FM04
Our new socket has been designed to allow connection to “Foster Type” fill nipples that are recessed deeply within the stock.
If you need a coupler release tool, then this socket should overcome that problem as the release collar is a full 30mm long, as opposed to the 10.5mm long on our standard coupler.
£15.36
The EXTENDED Quick Coupler Socket.
Our new socket has been designed to allow connection to “Foster Type” fill nipples that are recessed deeply within the stock.
If you need a coupler release tool, then this socket should overcome that problem as the release collar is a full 30mm long, as opposed to the 10.5mm long on our standard coupler.
Suitable for FX deep recess stocks, Daystate and Brocock deep recess stocks, early “Swift” and “Dr Bobs” type Theoben & BSA Superten quick fills without the need for an additional coupler release tool.
Also suits converted air tubes where the fill nipple has been installed after removing the pressure gauge from the recessed end of the air tube.
Connects to our Q/C Plug, High Pressure Fill Valve, Daystate, Benjamin, Brocock, Crosman, Logun Eagle, PCR1, Aselkon Ripley most HPA Paintball & Air Soft Tank side fill nipples & other compatible fill couplers.
Available with the UK industry standard 1/8″ BSP Male thread that suits most pump and cylinder fill lines.
Safe for use on all pre-charged equipment with a Max Working Pressure of 340BAR, 5000psi for breathing air only.
Do not exceed maximum working pressure.
1 x Extended Quick Coupler Socket
