October 8, 2026

Hand Pump or Electric Compressor: Which Is Best for Filling Your PCP Air Rifle?

If you own a PCP air rifle, having a reliable source of high-pressure air is essential. But with several ways to fill your rifle available, deciding which option is right for you isn’t always straightforward.

Two of the most convenient options are a PCP hand pump and an electric air compressor. Both allow you to fill your air rifle at home without relying on trips to have a diving cylinder refilled, but they offer quite different ownership experiences.

So, which should you choose?

The answer ultimately depends on how often you shoot, the size and pressure of your airgun, your budget and how much convenience you’re looking for.

Let’s take a closer look.

For many shooters, a good-quality hand pump remains one of the simplest ways to fill a PCP air rifle.

There is no electricity required, no separate diving bottle to refill and very little equipment to take with you. Once you have the appropriate connection for your rifle, you have your own independent source of high-pressure air.

This can make a hand pump particularly attractive to new PCP shooters, occasional users and anyone who values simplicity and portability.

Hill’s current MK5 Pro can reach pressures of up to 310 BAR / 4500 PSI and has been engineered to be around 20% easier to use for the average person compared with the previous generation. Hill MK5 Pro Pump

Advantages of a PCP Hand Pump

  • Simple to use with no electrical supply required
  • Portable, making it easy to take with you
  • Lower initial investment than an electric compressor
  • No need to take a diving cylinder elsewhere for refilling
  • Ideal for shooters who don’t need to fill large volumes of air regularly
  • Provides a completely independent method of filling your PCP

A hand pump can therefore be an excellent all-round solution, particularly if you have a relatively small cylinder and aren’t shooting through several fills in a session.

What About Moisture?

One consideration when compressing atmospheric air is moisture.

This is why moisture management has long been an important part of Hill’s PCP pump development.

The Hill MK5 Pro with Dry-Pac features the patented Hill colour-changing Dry-Pac system. Hill states that it removes around 90% of the moisture from the air entering the gun. The drying media gradually changes from orange to green as it absorbs moisture, providing a visual indication that it needs replacing.

For shooters choosing a hand pump, that provides an additional level of protection alongside the convenience of a manually powered system.

An electric compressor takes a different approach.

Rather than manually generating the pressure required to fill the rifle, the compressor does the hard work for you.

That convenience becomes particularly noticeable if you shoot regularly, own several PCP airguns, use larger cylinders or simply don’t want the physical effort involved in hand pumping.

Hill’s latest Evo-310 Electric Compressor has been designed, manufactured and assembled at Hill’s Sheffield factory and can be set from 50 BAR (755 PSI) up to 310 BAR (4500 PSI). Hill Evo 310 Electric Compressor

Advantages of an Electric Compressor

  • Minimal physical effort
  • Convenient for frequent PCP users
  • Particularly useful for higher-volume filling
  • Suitable for shooters with multiple PCPs
  • Removes reliance on manually pumping your rifle
  • Gives you an independent source of compressed air at home

For a shooter who uses their PCP regularly, the time and effort saved can make an electric compressor an attractive long-term investment.

What Makes the Evo-310 Different?

The Evo-310 is the latest stage in Hill’s development of our electric PCP compressor technology.

One of its key features is an automatic air-pressure purge, which operates whenever the compressor’s motor stops, including during a cooling cycle and when filling is paused or completed. This helps reduce the strain involved in restarting against high pressure while also purging air, including moisture, from inside the unit.

The compressor also incorporates a digital pressure sensor alongside an analogue gauge, plus updated electronics and software developed in-house. The compressor’s PCBs are also manufactured in Sheffield.

For additional moisture management, the Evo-310 can also be paired with the Hill Dry-Pac Pro.

PY-A-17041_Hill-DryPac-Pro-Air_1717172683

There’s no single answer that applies to every PCP shooter.

A hand pump could be right for you if:

  • You’re relatively new to PCP shooting
  • You shoot occasionally
  • Portability is important
  • You don’t always have access to mains electricity
  • You’re looking for a lower-cost way to become self-sufficient
  • You don’t mind some physical effort when filling

An electric compressor could be right for you if:

  • You shoot frequently
  • You regularly need to refill your PCP
  • You have multiple airguns to fill
  • Your setup requires greater volumes of high-pressure air
  • You want to minimise physical effort
  • Convenience is one of your main priorities

There’s also nothing to say you can’t own both.

A compressor can provide the convenience of electric filling at home, while a hand pump can remain an extremely useful portable or backup option.

Don’t Forget Your Air Rifle’s Requirements

Whichever method you choose, it’s important to know the correct filling pressure and procedure for your particular airgun.

Always follow the airgun manufacturer’s instructions and never exceed its specified fill pressure.

You should also check which filling connector or adaptor your airgun requires. The Hill MK5 Pro, for example, is supplied with a hose featuring a 1/8″ BSP connection, although some airguns require additional adaptors.

A pump or compressor being capable of a particular maximum pressure does not mean your rifle should be filled to that pressure.

Look After Your Filling Equipment Too

Your airgun isn’t the only piece of equipment that deserves looking after.

Routine maintenance helps keep PCP hand pumps and compressors operating correctly, particularly when they’re used regularly.

Hill provides dedicated servicing for its PCP hand pumps and electric compressors at our UK headquarters, including inspection, maintenance, replacement of components where required and pressure testing using genuine Hill parts. Servicing

Following the manufacturer’s maintenance instructions for your particular model will help you get the best from your filling equipment over the long term.

Ultimately, both can be excellent ways to fill a PCP air rifle.

If simplicity, portability and a lower initial investment are your priorities, a quality PCP hand pump such as the Hill MK5 Pro is difficult to overlook.

If you shoot regularly and want maximum convenience with minimal physical effort, stepping up to an Evo-310 electric compressor could transform your filling routine.

At Hill, we’ve been developing air pump technology in Sheffield since 1841. Today, that experience goes into both our manually operated PCP pumps and our latest electric compressor technology.

Explore our range of PCP hand pumps and electric compressors to find the filling solution that’s right for you.

Your Basket

Currently your basket is empty

Shop Products

Comprehensive Warranty on all Products