Items in Basket:
0
Total:
£0.00
Q.
Which Dry-Pac Kit do I need?
Q.
Is there a Guarantee with the Hill Pump?
Q.
How much moisture does the Dry-Pac remove?
Q.
What about Moisture?
Q.
Is the Hill Pump serviceable?
Q.
How does the Dry-Pac System work?
Q.
Does the Hill Pump need lubricating?
Q.
Is there a pumping technique for the Hill Pump?
Q.
How do I replace the Dry-Pac medium?
Q.
Within the first few strokes my pump is very difficult to operate especially on the up stroke and eventually locks?
Q.
What pressure can the Hill Pump reach?
Q.
How many strokes will it take to charge my gun?
Q.
What adaptor do I need for my PCP?
Q.
My pump appears to work but does not reach the required pressure?
Q.
How often should I replace Dry-Pac medium?
Q.
How much effort is required to use the Hill Pump?
Q.
Where is the Micron Filter and what does it do?
Q.
What is the Safety Bleed Valve?
Q.
Why not petroleum, oil or propellant based lubricants?
Q.
My gauge is losing pressure during pumping or at rest?
Q.
My pump “judders” and does not operate smoothly?
Q.
Can I regenerate the Dry-Pac medium?
Q.
How safe is the Dry-Pac medium?
Q.
The outer body tube of my pump is very warm?
Q.
Can I use a Microbore Hose with the Hill Pump?
Q.
How should I store the Dry-Pac medium?
